Home
>
products
>
Angle Valve
>
|
| Place of Origin | China |
| Brand Name | KAKA |
| Certification | ISO9001,CE |
| Model Number | HC-31215 |
Modern: Contemporary chrome finish. This designer angle valve stop puts a premium touch on those ugly pipe fittings for sinks, bathrooms, and toilet kitchen showers.
| No. | Part | Materials |
| 1 | Body | Brass |
| 2 | Cartridge | Brass |
| 3 | Stem | Brass |
| 4 | Seal | EPDM/cartridge |
| 5 | Seal Gasket | NBR |
| 6 | O ring | NBR |
| 7 | Thread | BSP, 1/2″x1/2″ |
| 8 | Handle Wheel | Zinc Alloy |
| 9 | Finish | Polishing and chrome plated |
Double Outlet Angle Valve
A double outlet angle valve, also known as a dual outlet angle valve, is a plumbing valve with two separate outlets that allow the control of water flow to two different fixtures. This type of valve is commonly used in situations where you need to supply water to multiple fixtures from a single water source. The two outlets are usually at a 90-degree angle to each other, which is why it's referred to as an "angle" valve.
Here's how to use a double outlet angle valve:
Identify the Valve: Locate the double outlet angle valve in your plumbing system. It is typically installed on the water supply line and is used for connecting two separate fixtures, such as two faucets or a faucet and a toilet.
Shut off the Water: Before using the valve, make sure to shut off the water supply to the fixtures you want to work on. Look for separate shut-off valves located upstream from the angle valve and turn them clockwise to stop the water flow.
Determine the Flow Direction: The double outlet angle valve has an inlet where the water flows in from the main supply line. The two outlets are where the water flows out to each of the fixtures. Ensure you understand the flow direction to control the water correctly.
Open the Valve: To allow water flow to both fixtures, turn the valve handle counterclockwise or in the direction indicated for opening. As you turn the handle, the internal mechanism will lift, allowing water to pass through both outlets simultaneously.
Adjust Water Flow: Angle valves usually have a quarter-turn mechanism, so you can adjust the water flow to each fixture individually by turning the handle partially or fully for each outlet. Turn it counterclockwise to increase the flow and clockwise to reduce or stop it.
Close the Valve: To stop the water flow to both fixtures, turn the valve handle fully clockwise or in the direction indicated for closing. Ensure the valve is tightly closed to prevent any water leakage.
Check for Leaks: After using the valve, check for any water leaks around the valve or the connected fixtures. If you notice any leaks, make sure the valve is fully closed and that the connections are properly sealed.
As always, if you are unsure about using a double outlet angle valve or if you encounter any plumbing-related issues, it's best to seek the assistance of a professional plumber to avoid any potential problems.
Advantages of double outlet angle valve
Double outlet angle valves offer several advantages in plumbing systems, making them a practical choice in various situations. Here are some of the key advantages:
Space-saving: Double outlet angle valves allow you to supply water to two fixtures from a single water source. This design helps save space, especially in tight or compact plumbing installations where two separate valves might not be feasible.
Cost-effective: Using a double outlet angle valve instead of two individual valves can be cost-effective as it requires fewer materials and installation time.
Keep in mind that while double outlet angle valves offer these advantages, their usage should still adhere to local plumbing codes and regulations. Proper installation and regular maintenance are essential to ensure the valves function effectively and remain leak-free. If you're unsure about the specific requirements for your plumbing project, it's always best to consult a professional plumber.
Simplified Plumbing: By combining two outlets in a single valve, it simplifies the plumbing system, reducing the number of connections needed and the potential points of failure.
Easy Shut-off: With one valve controlling water flow to both fixtures, it's more convenient to shut off the water supply to both fixtures simultaneously, making maintenance and repairs more manageable.
Aesthetically Pleasing: The streamlined design of a double outlet angle valve can be visually appealing and can contribute to an organized and clean appearance under the sink or behind appliances.
Efficient Water Control: Double outlet angle valves typically feature quarter-turn handles, making it easy to control the water flow to each fixture precisely.
Versatility: These valves can be used in various plumbing applications, such as supplying water to two separate faucets, connecting a faucet and a toilet, or providing water to a faucet and a dishwasher.
Reduced Risk of Leaks: Fewer connections mean a lower risk of potential leaks, provided the valve is properly installed and maintained.
Flexibility in Fixture Placement: Double outlet angle valves give you more flexibility in placing fixtures in your plumbing layout since you can connect two fixtures to a single water source without the need for additional pipes.
Water Conservation: By allowing individual control of water flow to each fixture, you can manage water usage more efficiently and conserve water when necessary.
OEM Logo Polybag, Colour Boxs, Colour Master Carton
FAQ
Q: How long is your product guarantee period?
A: We have Two years guarantee and 24 hours full-time service.
Q: What is your MOQ?
A: Normal Each Items 3000pcs MOQ.
Q: Can you accept OEM,ODM?
A: we accpet OEM.
Q: How long is your delivery time?
A: 30-35 days After Confirm Order
Contact Us at Any Time
