|
| Place of Origin | China |
| Brand Name | KAKA |
| Certification | ISO9001,CE |
| Model Number | MV-015B |
The mini ball valve is a quarter-turn type ball valve that used for shut-off application in the pipework
| Finising: | Polishing and Chrome plated |
|---|---|
| Handle: | Plastic Handle |
| Life time: | 100000 times On-Off |
| Materials: | HPB 57-3,CW617N, H58-3 |
| Size: | 15mm,22mm |
| Temperature: | -10˚C-100˚C |
| Thread connection | BSP, NPT |
| Working pressure | 12 bar |
| Warranty: | 12 months |
How to install dahl mini-ball valve
Prepare the Work Area: Shut off the water supply to the area where you will be installing the mini-ball valve. This can usually be done by turning off the main water supply valve.
Drain the Water: Open faucets or valves downstream of the installation point to drain any remaining water in the pipes.
Measure and Cut: Measure the section of pipe where you want to install the mini-ball valve. Use a pipe cutter to make a clean, square cut at the desired location. Ensure that the pipe ends are free from burrs or rough edges.
Prepare the Valve: Remove any protective caps or plugs from the mini-ball valve. Check the valve to ensure it is in the closed position (handle perpendicular to the pipe).
Apply Thread Sealant: Apply a suitable thread sealant or Teflon tape to the male threads on both ends of the mini-ball valve. This will help create a watertight seal when connecting to the pipes.
Install the Valve: Screw one end of the mini-ball valve onto one of the pipe ends, using a wrench to tighten it securely. Make sure the valve is oriented correctly, with the handle accessible and perpendicular to the pipe. Repeat the process to connect the other end of the valve to the remaining pipe end.
Test for Leaks: Slowly turn on the water supply and check for any leaks around the connections. If you notice any leaks, tighten the connections further or apply more sealant as necessary. Ensure that the valve operates smoothly by turning the handle to the open and closed positions.
Restore Water Supply: Once you are satisfied that there are no leaks and the valve is functioning properly, fully open the main water supply valve to restore water flow to the system.
It is essential to refer to the specific manufacturer's instructions provided with the Dahl mini-ball valve for any additional installation guidelines or considerations. Additionally, consult local plumbing codes and regulations to ensure compliance with applicable standards. If you are unsure or inexperienced with plumbing installations, it is recommended to seek the assistance of a professional plumber.
What is a mini ball valve ?
A mini ball valve is a compact and versatile valve that operates on the same principle as a standard ball valve. It is designed to control the flow of fluids through a small-diameter pipe or tubing. The "mini" in the name refers to its smaller size compared to traditional ball valves.
Here are some key features and characteristics of mini ball valves:
Size: Mini ball valves are typically available in smaller sizes, commonly ranging from 1/4 inch to 1 inch in diameter. These compact dimensions make them suitable for applications where space is limited or where finer control is required.
Construction: Mini ball valves are often constructed with a durable and corrosion-resistant material, such as brass, stainless steel, or PVC. The choice of material depends on the application and the fluids being handled.
Quarter-Turn Operation: Like standard ball valves, mini ball valves have a quarter-turn mechanism. This means that the valve can be fully opened or closed by rotating the handle or lever 90 degrees.
Inline Flow: Mini ball valves typically have a straight-through design, allowing for unobstructed flow when the valve is fully open. This design minimizes pressure drop and allows for efficient flow control.
Sealing Mechanism: Mini ball valves use a ball with a hole or port in the center, which rotates to control the flow. When the valve is closed, the ball is rotated to block the flow path, creating a tight seal against the valve seat.
Versatility: Mini ball valves can be used in various applications, including plumbing, irrigation, pneumatic systems, laboratory equipment, and industrial processes. They are suitable for both on/off control and throttling applications.
Handle Options: Mini ball valves may have different handle styles, including lever handles, T-handles, or wing handles, depending on the manufacturer and application.
Mini ball valves offer a convenient solution for controlling the flow of fluids in tight spaces or situations where a smaller valve size is required. Their compact design, ease of operation, and versatility make them a popular choice for a range of applications.
Compression Ball Valve Packing
OEM Logo Polybag, Colour Boxs, Colour Master Carton
FAQ
Q: How long is your product guarantee period?
A: We have Two years guarantee and 24 hours full-time service.
Q: What is your MOQ?
A: Normal Each Items 3000pcs MOQ.
Q: Can you accept OEM,ODM?
A: we accpet OEM.
Q: How long is your delivery time?
A: 30-35 days After Confirm Order
To install a Dahl mini-ball valve, follow these general steps:
Contact Us at Any Time
